Lexmark X543 Service Manual page 127

Diagnostics mode tests (continued)
INPUT TRAY TESTS (if Tray 2 is installed)
Feed Tests
Sensor Tests
BASE SENSOR TEST
Front Door
Input S1
Input S2
Fuser Exit
Standard Bin
C TMC Sensor
M TMC Sensor
Y TMC Sensor
K TMC Sensor
DEVICE TESTS
Flash Test
PRINTER SETUP
Defaults
Prt Color Page Count
Prt Mono Page Cnt
Perm Page Count
Serial Number
Engine Setting 1 through 4
Model Name
Configuration ID
ITU Barcode
Enable Edge to Edge Copy
Reset Fuser Cnt
EP SETUP
EP Defaults
Fuser Temp
DC Charge Adjust
Dev Bias Adj
Transfer Adjust
TPS SETUP
Right
Left
Reset Color Cal
Cal Ref Adj
REPORTS
Main Settings Page
EVENT LOG
Display Log
See "Feed Tests" on page
See "Sensor Test" on page
See "Base Sensor Test" on page
See "Device Tests" on page
See "Defaults" on page 3-19.
See "Page Counts" on page
See "Serial Number" on page
See "Model Name" on page 3-19
See "Configuration ID" on page 3-19
See "Enable Edge to Edge Copy" on page 3-20
See "EP Defaults" on page
See "Fuser Temp" on page
See "DC Charge Adjust, Deve Bias Adj, Transfer Adj" on page
See "DC Charge Adjust, Deve Bias Adj, Transfer Adj" on page
See "DC Charge Adjust, Deve Bias Adj, Transfer Adj" on page
See "Right or Left TPS" on page
See "Cal Ref Adj" on page
See "Main Settings Page" on page
See "Display Log" on page
3-17.
3-17.
3-18.
3-18.
3-19.
3-19.
3-21.
3-21.
3-22.
3-22.
3-22.
3-23.
Diagnostic aids
7525-xxx
3-21.
3-21.
3-21.
3-3