Planet FGSW-2840 User Manual page 89

Static Address Table
 Select
 MAC Address
 VLAN ID
 Port
 Type
 Aging Status
 If the corresponding port number of the MAC address is not correct, or the connected port (or
the device) has been changed, the Managed Switch cannot forward the packets correctly.
Please reset the static address entry appropriately.
 If the MAC address of a device has been added to the Static Address Table, connecting the
device to another port will cause its address not to be recognized dynamically by the Managed
Switch. Therefore, please ensure the entries in the Static Address Table are correct and valid.
 The MAC address in the Static Address Table cannot be added to the Filtering Address Table or
bound to a port dynamically.
 This static MAC address bound function is not available if the 802.1X feature is enabled.
Buttons
: Click to add new static MAC Address.
: Click to search.
: Click to apply changes.
: Click to delete the current MAC address.
: Click to display help web page.
 MAC: Enter the MAC address of your desired entry.
 VLAN ID: Enter the VLAN ID number of your desired entry.
 Port: Enter the Port number of your desired entry.
Select the entry to delete or modify the corresponding port number. It is
multi-optional.
Displays the static MAC Address.
Displays the corresponding VLAN ID of the MAC address.
Displays the corresponding Port number of the MAC address. Here you can modify
the port number to which the MAC address is bound. The new port should be in the
same VLAN.
Displays the Type of the MAC address.
Displays the Aging Status of the MAC address.
89
User's Manual of FGSW-2840 / FGSW-4840S