Planet FGSW-2840 User Manual page 80

 Select
 Port
 Admin Key
 Port Priority
(0-65535)
 Mode
 Status
 LAG
Buttons
: Click to apply changes.
: Click to display help web page.
Select the desired port for LACP configuration. It is multi-optional.
Displays the port number.
Specify an admin key for the port. The member ports in a dynamic aggregation
group must have the same admin key.
Specify a Port Priority for the port. This value determines the priority of the port to
be selected as the dynamic aggregation group member. The port with smaller Port
Priority will be considered as the preferred one. If the two port priorities are equal;
the port with smaller port number is preferred.
Specify LACP mode for selected port.
Enable/Disable the LACP feature for your selected port.
Displays the LAG number which the port belongs to.
80
User's Manual of FGSW-2840 / FGSW-4840S