Planet FGSW-2840 User Manual page 108

VLAN Trunking between two 802.1Q aware switches
Most of the cases are used for "Uplink" to other switches. VLANs are separated at different switches, but they need to access
with other switches within the same VLAN group. The screen in
Figure 4-4-4: VLAN Trunking between Two 802.1Q Aware Switches Diagrams
Setup steps
1. Create VLAN Group 2 and 3
Add VLAN group 2 and group 3.
2. Assign member port to VLAN group 2 and group 3:
Port-1,Port-2 and Port-3: VLAN 2 group.
Port-4,Port-5 and Port-6: VLAN 3 group.
Port-7 : VLAN 1 group.
User's Manual of FGSW-2840 / FGSW-4840S
Figure 4-4-4 appears.
108