Planet FGSW-2840 User Manual page 73

Status
 Detection Interval
 Automatic Recovery
Time
 Web Refresh Status
 Web Refresh Interval
Port Config
Port Select
 Select
 Port
 Status
 Operation Mode
 Recovery Mode
 Loop Status
 Block Status
 LAG
Buttons
: Click to apply changes.
: Click to remove the block status of selected ports.
: Click to display help web page.
 Recovery Mode is not selectable when Alert is chosen in Operation Mode.
 Loopback Detection must coordinate with storm control.
Set a loopback detection interval between 1 and 1000 seconds. By default, it's 30
seconds.
Time allowed for automatic recovery when a loopback is detected. It can be set as
integral multiple of detection interval.
Enable or disable web automatic refresh function.
Set a web refresh interval between 3 and 100 seconds. By default, it's 3 seconds.
Click the Select button to quickly select the corresponding port based on the port
number you entered.
Select the desired port for loopback detection configuration. It is multi-optional.
Displays the port number.
Enable or disable loopback detection function for the port.
Select the mode how the Managed Switch processes the detected loops.
 Alert: when a loop is detected, displays an alert.
 Port based: when a loopback is detected, displays an alert and blocks
the port.
Select the mode how the blocked port recovers to normal status.
 Auto: Block status can be automatically removed after recovery time.
 Manual: Block status only can be removed manually.
Displays the port status whether a loopback is detected.
Displays the port status about block or unblock.
Displays the LAG number the port belongs to.
73
User's Manual of FGSW-2840 / FGSW-4840S