Planet FGSW-2840 User Manual page 64

 Flow Control
 LAG
Buttons
: Click to apply changes.
: Click to display help web page.
 The port description can accept 16 characters only.
 The Managed Switch cannot be managed through the disabled port. Please enable the port
which is used to manage the Managed Switch.
 The parameters of the port members in a LAG should be set as the same.
 When using the SFP port with a 100M module or a gigabit module, it needs to configure its
corresponding Speed and Duplex mode.
 For 100M module, please select 100MFD while selecting 1000MFD for gigabit module. By
default, the Speed and Duplex mode of SFP port is 1000MFD. (For FGSW-2840 only)
Managed Switch should be in the same Speed and Duplex mode with the Managed
Switch. When "Auto" is selected, the Speed and Duplex mode will be determined
by auto-negotiation. For the SFP port, this Managed Switch does not support
auto-negotiation.
Allows you to enable/disable the Flow Control feature. When Flow Control is
enabled, the Managed Switch can synchronize the speed with its peer to avoid the
packet loss caused by congestion.
Displays the LAG number which the port belongs to.
64
User's Manual of FGSW-2840 / FGSW-4840S