Planet FGSW-2840 User Manual page 57

Application Example 1 for SSH:

Network Requirements
1.
Log on to the Managed Switch via password authentication using SSH and the SSH function is enabled on the Managed
Switch.
2.
PuTTY client software is recommended.

Configuration Procedure
1.
Open the software to log on to the interface of PuTTY. Enter the IP address of the Managed Switch into Host Name field;
keep the default value 22 in the Port field; select SSH as the Connection type.
2.
Click the Open button in the above figure to log on to the Managed Switch. Enter the login user name and password, and
then you can continue to configure the Managed Switch.
User's Manual of FGSW-2840 / FGSW-4840S
57