Planet FGSW-2840 User Manual page 170

 Egress Rate(Kbps)
 LAG
 Once enable ingress rate limit feature for the storm control-enabled port, storm control feature will
be disabled for this port.
When selecting "Manual" to set Ingress/Egress rate, the system will automatically select integral

multiple of 64Kbps that closest to the rate entered as the real Ingress/Egress rate. For example,
enter 1000Kbps for egress rate; the system will automatically select 1024Kbps as the real Egress
rate.
 When egress rate limit feature is enabled for one or more ports, suggested to disable the flow
control on each port to ensure the Managed Switch works normally.
Buttons
: Click to apply changes.
: Click to display help web page.
dropdown list or select "Manual" to set Ingress rate, the system will automatically
select integral multiple of 64Kbps that closest to the rate you entered as the real
Ingress rate.
Configure the bandwidth for sending packets on the port and select a rate from the
dropdown list or select "Manual" to set Egress rate, the system will automatically
select integral multiple of 64Kbps that closest to the rate you entered as the real
Egress rate.
Displays the LAG number which the port belongs to.
170
User's Manual of FGSW-2840 / FGSW-4840S