Planet FGSW-2840 User Manual page 13

Multicast
■ IGMP Snooping v1, v2 and v3
■ Multicast IP Table / Static Multicast IP
■ Multicast Filter
Security
■ L2 / L3 / L4 Access Control List
■ MAC Security
 Static MAC
 MAC Filtering
■ Port Security for Source MAC address entries filtering
■ Port Isolation, loopback detection
■ DHCP Filtering
Management
■ Switch Management Interface
- Web switch management
- Telnet Command Line Interface
- SNMP v1, v2c and v3
- SSL v2, v3 / SSH v1,v2 secure access
- IP / MAC / Port-based Web access control
■ Static, DHCP and BooTP for IP address assignment
■ System Maintenance
- Firmware upload / download via HTTP
- Configuration upload / download through HTTP
- Hardware reset button for system reset to factory default
- System CPU / Memory status monitor
■ System Time Setting
- Manual Setting
- Network Time Protocol
- PC clock synchronization
■ Daylight Saving Time Setting
■ SNMP trap for interface Link Up and Link Down notification
■ System Local Log / remote log / backup log
■ Four RMON groups (history, statistics, alarms and events)
■ Virtual Cable Test / Loop Back Test
User's Manual of FGSW-2840 / FGSW-4840S
13