Alcatel-Lucent 7210 Installation Manual page 56

Initializing the System and Downloading Software
#uplinkB Port Settings:
#System Settings:
Hit a key within 2 seconds to change boot parameters...
Press any key.
Enter password to edit the Boot Options File
Or CTRL-D to exit the prompt
Password:
The default password is password.
You must supply some required Boot Options. At any prompt, you can type:
"reset"
Press ENTER to begin, or 'flash' to enter firmware update...
Note:
options.
Press Enter.
Software Location
-----------------
Software Image URL:
Page 56
uplinkA-vlan
uplinkB-port
uplinkB-address
uplinkB-vlan
wait
persist
console-speed
"restart" - restart the query mode.
"reboot" - reboot.
"exit" - boot with with existing values.
- reset the bof and reboot.
The restart command can be used at any time to start off at the beginning of the menu
You must enter the URL of the TiMOS software.
The location can be on a Compact Flash device,
or on the network.
Here are some examples
cf1:/timos1.1R1
ftp://user:passwd@192.168.1.150/./timos1.1R1
tftp://192.168.1.150/./timos1.1R1
0
1/1/2
0
0
3
off
115200
7210 SAS-M Installation Guide