Alcatel-Lucent 7210 Installation Manual page 23

The -48V/+24V/AC LEDs on the left indicate the status of external power. The +12V LED on the
right indicates the status of the internal power conversion process.
Note:
supplies can be used simultaneously.
Note:
extended temperature range.
Note: The +24V DC power module must not be used simultaneously with the -48V DC power supply.
Note:
chassis ONLY.
7210 SAS-M Installation Guide
You must use AC and/or DC power supplies with your 7210 SAS-M. AC and DC power
The 7210 SAS-M 24F 2XFP ETR variant must use a power supply which supports
The +24V DC power module is supported on the 7210 SAS-M 24F 2XFP ETR variant
7210 SAS-M Overview
Page 23