Table 1: Information Symbols - Alcatel-Lucent 7210 Installation Manual

Information Symbols
Table 1

Table 1: Information Symbols

Symbol Meaning
Danger
Caution
Warning
Note
Class 1 Laser Product
Technical Support
If you purchased a service agreement for your 7210 SAS-M and related products from a distributor
or authorized reseller, contact the technical support staff for that distributor or reseller for
assistance. If you purchased an Alcatel-Lucent service agreement, contact technical assistance at:
Page 10
describes symbols contained in this guide.
This symbol warns that improper handling and installation could result in bodily
injury. An electric shock hazard could exist. Before you begin work on this
equipment, be aware of hazards involving electrical circuitry, networking
environments, and instigate accident prevention procedures.
This symbol warns that improper handling and installation could result in
equipment damage or loss of data.
This symbol warns that improper handling may reduce your component or
system performance.
This symbol provides additional operational information.
Class 1 laser products are listed in the MDA installation guides. Only approved
Class 1 replaceable laser transceivers should be used with this product.
Web: http://www1.alcatel-lucent.com/comps/pages/carrier_support.jhtml
Description
7210 SAS-M Installation Guide