Cleaning - Oki MC860 Maintenance Manual

Oki Data CONFIDENTIAL

6.1 Cleaning

Clean inside and outside of the printer with clean dry cleaning cloth and small vacuum
cleaner (hand cleaner) as required.
Note!
Be careful not to touch the image drum terminals, the LED lens
array and the LED head connectors.
Clean surface of MC860
Note! Do not use benzine or paint thinner for cleaning because they can
give damage to the plastic parts and coated paint.
1. Turn OFF the power of the MC860.
Note! For the method of turning OFF the power, refer to "Turn OFF the
power" of the User's Manual (Basic Operation edition).
43967002TH Rev.1
1. Press the < SETUP > key.
2. Press [Shutdown]
2. Clean surface of MFP.
Note! • Do not use any liquid other than water and neutral detergent.
• The MFP requires no lubrication. Do not lubricate the MC860.
6. Periodic Maintenance
3. Press [Yes].
4. When the following screen is displayed,
turn the POWER switch of the MFP to
ON.
1. Clean surface of MC860 with a clean
cloth wrung out stringently of clean
water or neutral detergent.
2. Clean surface of MC860 with soft clean
cloth.
275 /