Oki Data CONFIDENTIAL
4.2.3.19 Belt motor Assy/Fuser motor Assy
(1) Remove the main control PCB and the print engine roller PCB. (Refer to chapters
4.2.7 and 4.2.8.)
(2) Remove the low voltage power supply. (Refer to chapter 4.2.3.18.)
(3) Remove the insulator
.
43967002TH Rev. 1
(4) Disconnect the two cables
from the clamp, and remove the four screws (silver)
from the locations where the figure 2 is inscribed in the bracket Remove the belt
motor Assy
.
4. Part Replacement
182 /