Oki Data CONFIDENTIAL
4.2.3.15 MPT Assy/MPT hopping roller/Separator/Pickup roller
(1) Remove the paper cassette.
(2) Open the MPT Assy
and remove the right and left stays by bending them
outside, and remove the MPT Assy
Stay
(3) Remove the MPT
from the MPT Assy
43967002TH Rev. 1
by sliding it to the right.
Stay
.
(4) Raise the pickup device upward and slide the feed paper roller
remove it by bending the claws.
(5) Rotate the separator
centering around its pivot and remove the pivots at the two
locations. Remove the separator
(6) Remove the pickup roller
by bending the side surface of the frame.
4. Part Replacement
to the left and
Claw
and the two springs
.
175 /