Service Function - Oki MC860 Maintenance Manual

Oki Data CONFIDENTIAL

5.1 Service function

The service function shall be used for the purpose of MFP maintenance by the experienced
maintenance/service engineer, and is not opened of its specifications to general users. The
respective items of the service function are contained in the service menu.
5.1.1 How enter the service menu
Enter the service menu by the following operation.
1. The password entry screen is displayed when the special operation of the
hardware keys is operated while an MFP is running. The MFP enters the
condition waiting for password entry.
2. When the password that is entered by maintenance/service engineer matches
the specified password, the service menu is displayed.
5.1.1.1 Special operation of the hardware keys
The operation procedure to display the password entry screen of the service menu is
described as follows.
1. To display the "SETUP", press the [SETUP] key while an MFP is running.
2. Press the ten-keys in the order of [#]
3. The password entry screen is displayed.
5.1.1.2 Password entry screen
Value
Password within 6 to 12 digits
Enter the password that is required to enter the service menu.
The password should be entered with the 6- to12-digit alphanumeric characters.
Password can be changed by the "Change Password" menu of the "System Maintenance"
menu.
43967002TH Rev.1
[1] [9] [3] [7].
Default Display condition
000000 None
5.1.2 Operation required upon completion of the service
menu operation
In order to complete operations of the service menu, the [Close] button that is displayed
on the service menu top screen should be pressed. Transition to the normal operation by
pressing the hardware keys such as RESET key is regarded as invalid.
If any change of setting that requires reboot of the MFP to reflect the changed setting is
made and the [Close] button is pressed, an MFP enters the normal operating condition after
the MFP reboots. Regarding the items that require reboot of MFP , refer to section 5.2.1.
5. Maintenance Menu
When the [Close] button is pressed, the MFP
enters the normal operating condition.
* Transition to the standby screen by pressing
the hardware keys such as RESET key is
regarded as invalid.
213 /