Linksys Etherfast User Manual page 44

Subnet Information
The Subnet Information screen displays information about the IP interface
for VLANs configured on this Switch.
• IP Address - The IP address associated with the specified VLAN inter-
face.
• Subnet Mask - A template that identifies the address bits in the host
address used for routing to specific subnets.
• VLAN - The VLAN associated with this IP interface.
• (Ports) - The ports on the Switch.
Read the numbers vertically; they range from 1-26. For each port
number, there are two choices: "S" or "P." Use the spacebar to
scroll through the choices.
The letter "S" indicates a static entry.
The letter "P" indicates the port is a static entry, and the port's PVID
is set to this VLAN ID.
Select Apply to make changes. Select OK to return to the previous panel.
Select Prev Page to view the previous page. Select Next Page to view the
next page. To display a specific page, set the page number in the Page field
and then press Apply.
82
EtherFast Series EtherFast
®
Select OK to return to the previous panel. Select First Page to view the first
page. Select Next Page to view the next page.
Managed 24-Port with Dual Gigabit Switch
®
ARP Table
The ARP Table shows the IP-to-MAC addresses discovered by ARP.
• IP Address - IP addresses for which ARP has resolved the physical
address through a broadcast message.
• MAC Address - MAC address that maps to the corresponding IP
address.
• VLAN - The VLAN group this host has been assigned to.
• Port - The port this host device is attached to.
83