Management Setup Menu - Linksys Etherfast User Manual

Switch Information
The Switch Information screen displays hardware and firmware version num-
bers for the main board, as well as the power status.
• Hardware Version - Hardware version of the main board.
• Firmware Version - System firmware version in ROM.
• Serial Number - Serial number of the main board.
• Number of Ports - Number of ports available on this Switch.
• Power Status - Shows if power is active or inactive.
• Fan Power Status - Shows if power to fan is active or inactive.
• G1 Information - Speed of the first Gigabit port.
• G2 Information - Speed of the second Gigabit port.
Select OK to return to the previous panel.
16
EtherFast Series EtherFast
®

Management Setup Menu

The Management Setup Menu screen allows you to adjust the communication
parameters, ensuring a reliable connection. The new administrator password is
set through this menu. The IP parameters for Web, telnet, or SNMP/RMON
management are set here as well.
• Network Configuration - Includes IP setup, ping facility, and HTTP
• Serial Port Configuration - Sets communication parameters for the serial
• SNMP Configuration - Activates authentication failure traps and config-
• User Configuration - Sets the user names and passwords for system
• TFTP Download - Downloads new version of firmware to update your
• Configuration File - Allows downloading of a configuration file.
Select OK to return to the previous panel.
Managed 24-Port with Dual Gigabit Switch
®
setup for the on-board Web agent.
port, including baud rate, console time-out, and screen data refresh inter-
val.
ures communities and trap managers.
access.
system.
17