Linksys Etherfast User Manual page 34

Add MAC Address Filter
The Add MAC Address Filter screen allows you to add MAC
addresses.
• MAC Address - The MAC address of a host device attached to this
Switch.
Select OK to confirm the changes. Select Cancel to cancel any changes.
Security Mode
The Security Mode menu is used to enable/disable the Learning function.
• Learning Function - Enables/disables Learning function for security
filtering.
Select Apply to make a change. Select OK to return to the previous panel.
Select Cancel to cancel any change.
62
EtherFast Series EtherFast
®
To add an IP address, use Add. To delete an address, highlight it with the cur-
sor and press Enter. Select Apply to make changes. Select OK to return to
the previous panel. Select Prev Page to view the previous page. Select Next
Page to view the next page. To display a specific page, set the page number
in the Page field and then press Apply.
Select OK to confirm the changes. Select Cancel to cancel any changes.
Managed 24-Port with Dual Gigabit Switch
®
IP Security Filtering Configuration
Security filtering can be used to drop all the traffic from a specified IP
address. (Only available when the Switch is in multilayer mode)
Add IP Address Filter
The Add IP Address Filter screen allows you to add IP
addresses.
• IP Address - The IP address to be filtered.
63