Audio Settings; Setting Time And Date; Choosing A Language - Mitel MiVoice 6920 User Manual

Terminal settings

Audio settings

5 - Set Audio

Setting time and date

6 - Time and Date

Choosing a language

45
Used to make the following settings:
1 - Audio mode: depending on the selected audio mode:
-> Speaker: This is the default setting. Calls can be made or
received using the handset or handsfree speakerphone. In
handset audio mode, pressing the
phone switches to handsfree speakerphone. In Speaker
audio mode, lift the handset to switch to the handset.
-> Headset: Choose this setting if you want to make or receive
all calls using a handset or headset. Calls can be switched
from the handset to headset by pressing the
on the phone. To switch fr om the headset to the handset, lift
the handset.
-> Speaker/headset: Incoming calls are sent to the handsfree
speakerphone first when the
pressing the button again, you can switch back and forth
between the handsfree speakerphone and the headset. At
anytime, lifting the handset switches back to the handset
from either the handsfree speakerphone or the headset.
-> Headset/Speaker: Incoming calls are sent to the headset
first when the
button again, you can switch back and forth between the
headset and the handsfree speakerphone. At anytime, lifting
the handset switches back to the handset from either the
headset or the handsfree speakerphone.
2 - Headset Mic Volume: set the volume level for the headset
microphone:
-> Select the Low, Medium, or High volume level. Default is
Medium.
3 - DHSG : enable or disable DHSG headset support
-> Select the DHSG is OFF or DHSG is ON option. Default is
DHSG is OFF
Different parameters are used to define the time zone, the use of
summer time, time and date format, and time and date update.
Remarque : the values entered for time and date can be over-
written through system update.
If the Menu/Ident key is available on your terminal, it is better to
use the menu option (See
button is pressed. By
button is pressed. By pressing the
"Changing the language", page
button on the
button
43).