Ricoh SP C400DN User Manual page 480

Monitoring and Configuring the Printer
Near Replacing: Develop. Unit K
Near Replacing: Develop. Unit M
Near Replacing: Develop. Unit Y
Near Replacing: Fusing Unit
Near Replacing: Maintenance Kit
Near Replacing: Transfer Unit
Nearly Full: Waste Toner
Need more Staples
No Paper: Interposer Tray
No Paper: Selected Tray
No Paper: Tray 1
No Paper: Tray 2
No Paper: Tray 3
Not Detected: B2 Lever
Not Detected: Black Toner
6
Not Detected: Cyan Toner
Not Detected: Develop. Unit (C)
Not Detected: Develop. Unit (K)
Not Detected: Develop. Unit (M)
Not Detected: Develop. Unit (Y)
Not Detected: Duplex Feed Unit
Not Detected: Finisher
Not Detected: Fusing Unit
Not Detected: Input Tray
Not Detected: Interposer
Not Detected: Magenta Toner
Not Detected: PCU (C)
Not Detected: PCU (K)
Not Detected: PCU (M)
Not Detected: PCU (Y)
Not Detected: Transfer Unit
Not Detected: Tray 1
Not Detected: Tray 2
Not Detected: Tray 3
Not Detected: WasteToner Bottle
256
Messages Description
Prepare the new development unit (black).
Prepare the new development unit (magenta).
Prepare the new development unit (yellow).
Prepare the new fusing unit.
Prepare the new maintenance kit.
Prepare the new transfer unit.
Waste toner bottle is nearly full.
Stapler has almost run out of staples.
There is no paper in interposer unit.
There is no paper in specified tray.
There is no paper in tray 1.
There is no paper in tray 2.
There is no paper in tray 3.
B2 lever is not correctly set.
Black toner is not correctly set.
Cyan toner is not correctly set.
The development unit (cyan) is not correctly set.
The development unit (black) is not correctly set.
The development unit (magenta) is not correctly set.
The development unit (yellow) is not correctly set.
The duplex feed unit is not correctly set.
Finisher is not correctly set.
The fusing unit is not correctly set.
The paper feed tray is not correctly set.
Interposer unit is not correctly set.
Magenta toner is not correctly set.
The photoconductor unit (cyan) is not correctly set.
The photoconductor unit (black) is not correctly set.
The photoconductor unit (magenta) is not correctly set.
The photoconductor unit (yellow) is not correctly set.
The transfer unit is not correctly set.
Tray 1 is not correctly set.
Tray 2 is not correctly set.
Tray 3 is not correctly set.
Waste toner bottle is not correctly set.