Ricoh SP C400DN User Manual page 105

Glossy Paper
Printer setup
Printer driver setup
Duplex Printing
Note
❒ If the printing result is badly wet or smudged, change the setting on the
printer's control panel as the following:
• Press the {Menu} key, select [Maintenance], [General Settings], and then select
[Glossy Paper]. Select one from [Glossy Paper 1], [Glossy Paper 2], [Glossy Paper
3], or [Glossy Paper 4].
The greater number corresponds to the thicker setting.
The one of these items is normally detected automatically according to the
paper type you set. It is not necessary to change this setting when the print-
ing result has no problem.
Coated Paper
Printer setup
Printer driver setup
Duplex Printing
Note
❒ If the printing result is badly wet or smudged, change the setting on the
printer's control panel as the following:
• Press the {Menu} key, select [Maintenance], [General Settings], and then select
[Coated Paper]. Select one from [Coated Paper 1], [Coated Paper 2], [Coated Pa-
per 3], or [Coated Paper 4].
The greater number corresponds to the thicker setting.
The one of these items is normally detected automatically according to the
paper type you set. It is not necessary to change this setting when the print-
ing result has no problem.
• Press the {Menu} key, select [Paper Input] , and then select
[Glossy Paper] for the selected tray's paper type.
Select [Glossy] in the [Paper type:] list.
Possible
• Press the {Menu} key, select [Paper Input] , and then select [Coat-
ed Paper] for the selected tray's paper type.
Select [Coated paper] in the [Paper type:] list.
Not possible
Paper Recommendations
5
83