Replacing The Maintenance Kit; Before Replacing - Ricoh SP C400DN User Manual

Replacing the Maintenance Kit

R WARNING:
• Do not risk electric shock by handling the power cord or plug with wet hands.
R CAUTION:
• The inside of this printer becomes very hot. Do not touch parts labelled "v"
(indicating a hot surface). Touching these parts will result in burns.
• Grip the plug, not the cord, when pulling the plug from the socket. Pulling
the cord causes wear and tear that can result in fire or electric shock.
• Wait at least one hour after power off before replacing parts. Not allowing
the printer to cool may result in burns.
❖ When to replace the Maintenance Kit
Replace Maintenance Kit if the following messages appear on the display:
• "Replace Maintenance Kit."

Before Replacing

The Maintenance Kit contains parts for maintaining the printer.
Replace all the parts included in the Maintenance Kit at the same time. Replace
them according to the following procedure.
A
Turn off the power, and then unplug the power cable.
Important
❒ Wait at least an hour after power off to allow internal parts to cool down
before replacing the Maintenance Kit.
B
Check the box contains the following items:
• Friction Pad × 3
See p.126 "Replacing the Friction Pad".
• Paper Feed Roller × 3
See p.128 "Replacing the Paper Feed Roller".
• Transfer Roller
See p.130 "Replacing the Transfer Roller".
• Fusing Unit
See p.132 "Replacing the Fusing Unit".
• Dustproof Filter × 2
See p.134 "Replacing the Dustproof Filter".
Replacing the Maintenance Kit
6
125