Ricoh SP C400DN User Manual page 2

Safety Information
When using this machine, the following safety precautions should always be fol-
lowed.
In this manual, the following important symbols are used:
Indicates a potentially hazardous situation which, if instructions are not followed, could result
in death or serious injury.
Indicates a potentially hazardous situation which, if instructions are not followed, may result
in minor or moderate injury or damage to property.
R WARNING:
• Confirm the wall outlet is near the machine and freely accessible, so
that in the event of emergency, it can be unplugged easily.
• Plug and unplug the power cable with dry hands, or an electric shock
could occur.
• Only connect the machine to the power source described in the man-
ual.
• Avoid multi-wiring.
• Do not damage, break or make any modifications to the power cord.
Do not place heavy objects on it, pull it hard or bend it more than nec-
essary. These actions could cause an electric shock or fire.
• Do not incinerate spilled toner or used toner. Toner dust is flammable
and might ignite when exposed to an open flame.
• Do not take apart or attempt any modifications to this machine. There
is a risk of fire, electric shock, explosion or loss of sight. If the ma-
chine has laser systems, there is a risk of serious eye damage.
• Do not handle the power cord or plug with wet hands. Doing so might
cause an electrical shock.
• Keep the machine away from flammable liquids, gases, and aerosols.
A fire or an electric shock might occur.
• To avoid possible build-up of ozone, locate this machine in a large
well ventilated room that has an air turnover of more than 30
3
m /hr/person.
2