Installing The Postscript 3 Printer Driver (Windows Xp, Windows Server 2003) - Ricoh SP C400DN User Manual

Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003)
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ In an IPv6 environment, you cannot use the LPR Port. Use the SmartDevice-
Monitor port.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C
Select an interface language, and then click [OK].
The default interface language is English.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Select [My Computer], and then click [Next >].
F
Click [Local Printer attached to this computer.], and then click [Next >].
G
Click [Create a new port:].
H
Click [LPR Port] in [Create a new Port], and then click [Next >].
I
Enter the printer's IP address in the [Name or address of server providing lpd]
box.
J
Enter "lp" in the [Name of printer or print queue on that server box], and then click
[OK].
K
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
L
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
M
Click [Next >].
N
Specify whether or not to print a test page, and then click [Next >].
O
Click [Finish].
The printer driver installation starts.
Using the LPR Port
39
1