Device List - Furuno FELCOM 250 Operator's Manual

1. In the alert information window, select [New SysMsg] and press the Enter key.
The most recent system messages appears. A maximum of 10 system messages
can be saved, however the messages are erased when the power is turned off.
2. If there are more than two alert messages, press
messages. Use
3. Press the Enter key to close the message.
Note: You can also display system messages with the [Sys Msg] icon in the main
menu.
3.7

Device List

The Device list displays a list of all devices (communication unit, handset, incoming
indicator).
1. At the idle screen, press the Enter key to open the main menu.
2. Press
"Detecting" appears while the list is being prepared. When the search is complet-
ed, the [Device list] screen appears.
3. Press the
Msg #/Total msg # saved
to go back one message, and
, to select the [Device] icon and press the Enter key. The message
key to close the menu.
3. SETTINGS FOR HANDSET
and
to go forward one message.
Communication Unit
Incoming Indicator
Handset
to cycle through the
3-19