Furuno FELCOM 250 Operator's Manual page 134

6. WEB FUNCTIONS
Item
Cancel button
Group setting screen (IP filter)
Click IP filter on the Group setting screen to show the IP filter setting screen. This
screen lets you prevent unwanted communications. Set the screen according to appli-
cation and system.
Delete button
Add IP filter button
Change priority button
Pri.
Action
Dir
DST. address
From address
Protocol
Area
Edit button
6-20
Click to return to uncheck checked items.
No. of registrations/No. of registrations available
Item
Delete items with checkmarks [ ].
Register new IP filter. (Max. 100.) The IP filter entry
screen appears.
Change priority of IP filters. The priority edit screen ap-
pears.
Show priority. (The smaller the number the higher the
priority.)
Show actions.
Show direction.
Show the recipient address (if not set, "anywhere" is
shown).
Show the sender address (if not set, "anywhere" is
shown).
Display the protocol.
• If [Protocol] is [Any], displays the protocol number.
• If [Protocol] is [TCP/UDP], [TCP], [UDP]: displays the
port range.
Edit the IP filter. The edit screen appears.
Description
VPN pass-through
Description