Ios Device Settings - Furuno GP1870F Setup Manual

3-3 iOS Device Settings

After the GP1870F is ready for the wireless network with an iOS device, proceed to the following settings on the iOS
device to be linked with the GP1870F.
1. Access [Settings] – [Wi-Fi] and turn on the Wi-Fi.
2. Select the SSID of [GP-1870F-xxx], the same name
as the one shown on the GP1870F wireless connection
setup page.
3. The following notice may pop up; tap [Join Anyway]
to continue to establish the wireless connection.
4. A [✓] symbol will appear when the Wi-Fi connection is established. To confirm the connection, tap the SSID icon to verify
that an IP address and subnet mask are shown in the DHCP tab.
Tips:
After the Wi-Fi settings on the iOS device are complete,
the GP1870F will indicate that an iOS device is connected.
Access [MENU] – [GENERAL] – [Plan2Nav Link] –
[CONNECTED DEVICE] and see that [iOS Device] is
indicated.
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
9