Furuno FELCOM 250 Operator's Manual page 77

5. To have settings detected automatically, press 1 to select [Automatic]. To enter
settings manually, press 2 to select [Manual]. For [Automatic], go to step 24. For
[Manual], go to step 6.
6. Press 1 to select [IP obtain] to show the [IP obtain] screen.
7. Press or to select the method for obtaining the IP address.
[Static IP]: The IP address, subnet mask and default gateway are set manually.
[DHCP]: The IP address, subnet mask and default gateway are obtained automat-
ically from the DHCP server.
8. Press the Enter key. Do one of the following depending on selection made at step
7.
If you select the [Static IP] at step 7, the [Static IP] screen appears. Go to step 9.
If you select the [DHCP] at the step 7, the [Manual set.] screen appears. Go to
step 16.
Static IP factory default settings
9. With the [IP address] field selected, press the Enter key.
10. Enter the IP address for this unit, and press the Enter key.
11. Press to select the [Subnet mask] field, and press the Enter key.
12. Enter the Subnet mask and press the Enter key.
13. Press to select the [Def. gateway] field, and press the Enter key.
3. SETTINGS FOR HANDSET
3-15