How To Set The Signature And Password - Furuno FELCOM 250 Operator's Manual

5. WEB SOFTWARE
5.5.7

How to set the signature and password

You can set up the SMS signature and password in the SMS Settings screen.
Signature
Add a signature to all SMS messages automatically as follows:
1. Click [SMS] in the menu bar.
2. Click [SMS settings]. The [SMS settings] screen is displayed as shown:
3. To automatically add a signature, place a [ ] in the checkbox beside [Add signa-
ture]. Leave the checkbox empty not to add a signature. If adding a signature, go
to step 4. If not adding a signature go to step 5.
4. Enter a signature in the Signature box. (Maximum 156 characters).
5. Click the [Apply] button. The message "Setting completed." is displayed.
6. Click the [OK] button.
Password
To activate password to access the SMS top screen, do the following.
1. Click [SMS] in the menu bar.
2. Click [SMS settings] in the sub menu area.
3. Erase the [ ] in the [Save password] checkbox.
4. Click [Apply]. The message "Setting completed." appears.
5. Click the [OK] button. Hereafter, a password is required to open the SMS menu.
5-16
Remaining character count