Login Displays; How To Login To A Log With Password - Furuno FELCOM 250 Operator's Manual

5.9

Login Displays

You can display four logs: Registration log, Voice call log, Data connection log, and
Event log. When the storage capacity of a log is reached, the oldest entries are erased
in order.
Registration
Voice call
Data connection
Event
Note 1: The voice and data communication values shown on the terminal display and
within terminal logs are for indicative purposes only. These values should not be uti-
lized for billing or billing comparison purposes.
Note 2: The latest 100 entries for any log are shown. To view all the entries of a log,
save the log to a CSV file. A log stores up to 1000 entries.
A log can be forwarded to a PC that has the syslog application.
5.9.1

How to login to a log with password

Do the following to login to a log with a password.
1. Click the [admin login] button to show the login window.
2. Enter Log in the Username box and 01234567 in the Password box. 01234567 is
the default password. To change the password, see section 6.1.7.
3. Click the [Login] button. "Log" appears in the menu bar. The button name changes
from [login] to [logout].
4. To log out, click the [admin logout] button. Log disappears from the menu bar. The
button name changes from [logout] to [login].
Note: Automatic logout is possible by closing your Web browser.
Log Capacity for entries
1000 for each log
5. WEB SOFTWARE
No. of entries displayable
100 entries for each log
5-23