Compaq SP700 Reference Manual page 55

3-18 Intelligent Manageability
4. Install the retaining screw provided in the cable lock kit.
Figure 3-3.
5. Place bracket B over bracket A to cover the retaining screw.
6. Install a padlock (not provided) through bracket A to inhibit access to
the interior of the workstation. Or, to inhibit access to the interior of the
workstation and secure the workstation to a fixed object, install a cable
lock (not shown).
Figure 3-4.
A
Installing bracket A
Securing the workstation with a padlock
A
B