Compaq SP700 Reference Manual page 50

5. Turn on the workstation.
IMPORTANT: Clearing the Power-on Password will also clear the Setup
Password. Be sure to reestablish your Setup Password after clearing the
Power-on Password.
6. Turn off the workstation once more. Disconnect the power cord from the
grounded AC outlet and from the power connector on the rear of the
workstation.
7. Remove the side access panel and the expansion board assembly to
access SW1 on the system board.
8. Return switch 6 to its original default (OFF) position.
9. Establish a new Power-on Password, if desired.
10. Reassemble and restart the workstation.
Compaq Professional Workstation SP700 Reference Guide
3-13