Removing The Front Bezel; Removing Bezel Blanks - Compaq 470022-515 - Evo - D300 Hardware Reference Manual

Removing the Front Bezel

Removing Bezel Blanks

Hardware Reference Guide
1. Shut down the operating system properly, then power off the
computer and any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices.
2. Remove the computer cover.
3. Pull up on the two release tabs, then rotate the front bezel away
from the chassis to release it.
Removing the Front Bezel
When replacing the front bezel, ensure that the bottom hinge points
are properly placed in the chassis before rotating the front bezel
back into its original position.
1. Shut down the operating system properly, then power off the
computer and any external devices. Disconnect the power cord
from the power outlet and disconnect any external devices.
2. Remove the computer cover.
3. Remove the front bezel.
4. Gently pinch the release mechanism, then remove the desired
bezel blank.
Hardware Upgrades
2-5