Figure 27-1 Applying Nat For Internet Access; Figure 27-2 Applying Nat To The Remote Node - ZyXEL Communications Prestige 792H User Manual

Prestige 792H User's Guide
The following figure shows how you apply NAT to the remote node in menu 11.1.
Step 1. Enter 11 from the main menu and choose a node number.
Step 2. Move the cursor to the Edit IP/IPX/Bridge field, press [SPACE BAR] to select Yes and then
press [ENTER] to bring up Menu 11.3 - Remote Node Network Layer Options. Use the space
bar to toggle through the selections for NAT and choose the option you want.
IP Options:
IP Address Assignment = Dynamic
Rem IP Addr = 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= N/A
NAT= SUA Only
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= None
IP Policies=
27-2
Menu 4 - Internet Access Setup
Press Space Bar to Toggle.

Figure 27-1 Applying NAT for Internet Access

Menu 11.3 - Remote Node Network Layer Options
Enter here to CONFIRM or ESC to CANCEL:

Figure 27-2 Applying NAT to the Remote Node

ISP's Name= test
Encapsulation= RFC 1483
Multiplexing= LLC-based
VPI #= 1
VCI #= 1
Service Name= N/A
My Login= N/A
My Password= N/A
NAT= SUA Only
Address Mapping Set= N/A
IP Address Assignment= Static
IP Address= 0.0.0.0
ENET ENCAP Gateway= N/A
Press ENTER to Confirm or ESC to Cancel:
Bridge Options:
Ethernet Addr Timeout(min)= N/A
NAT