Figure 26-2 Bridge Static Route Setup; Figure 26-3 Edit Bridge Static Route; Table 26-2 Edit Bridge Static Route - ZyXEL Communications Prestige 792H User Manual

Choose a static route to edit in menu 12.3. You configure bridge static routes in menu 12.3.1 as shown next.
FIELD
Route # This is the route index number you typed in Menu 12.3 – Bridge Static Route Setup.
Route Name Type a name for the bridge static route for identification purposes.
Active Indicates whether the static route is active (Yes) or not (No).
Ether Address Type the MAC address of the destination computer that you want to bridge the
packets to.
IP Address If available, type the IP address of the destination computer that you want to bridge
the packets to.
Gateway Node Press [SPACE BAR] and then [ENTER] to select the number of the remote node (one
to eight) that is the gateway of this static route.
Bridging Setup
Menu 12.3 - Bridge Static Route Setup
1. ________
2. ________
3. ________
4. ________
Enter selection number:

Figure 26-2 Bridge Static Route Setup

Menu 12.3.1 - Edit Bridge Static Route
Route #: 1
Route Name=
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to Confirm or ESC to Cancel:

Figure 26-3 Edit Bridge Static Route

Table 26-2 Edit Bridge Static Route

Prestige 792H User's Guide
DESCRIPTION
26-3