ZyXEL Communications Prestige 792H User Manual page 181

LABEL
End / Subnet Mask When the Remote Address Type field is configured to Single, enter the IP address
Address
Information
Local ID Type Select IP to identify this Prestige by its IP address.
Content When you select IP in the Local ID Type field, type the IP address of your computer
My IP Address Enter the WAN IP address of your Prestige. The Prestige uses its current WAN IP
Peer ID Type Select IP to identify the remote IPSec router by its IP address.
VPN Screens
Table 14-7 VPN IKE
in the IP Address Start field again here. When the Remote Address Type field is
configured to Range, enter the end (static) IP address, in a range of computers on
the network behind the remote IPSec router. When the Remote Address Type field
is configured to Subnet, enter a subnet mask on the network behind the remote
IPSec router.
Select DNS to identify this Prestige by a domain name.
Select E-mail to identify this Prestige by an e-mail address.
or leave the field blank to have the Prestige automatically use its own IP address.
When you select DNS in the Local ID Type field, type a domain name (up to 31
characters) by which to identify this Prestige.
When you select E-mail in the Local ID Type field, type an e-mail address (up to 31
characters) by which to identify this Prestige.
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address.
address (static or dynamic) in setting up the VPN tunnel if you leave this field as
0.0.0.0. The VPN tunnel has to be rebuilt if this IP address changes.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.
Prestige 792H User's Guide
DESCRIPTION
14-11