Steering Stem - KYMCO Active 50 Service Manual

11
. FRONT WHEEL/SUSPENSION/
STEERING
Torque: 1.5～2.5kg-m
Apply engine oil to a new oil seal and install
the oil seal using the fork seal driver.
Then, install the snap ring and dust seal.
Fully compress the front fork and fill SAE8#
engine oil into the front fork tube.
Do not fill too much engine oil.
Specified Capacity: 50cc
Install the damping spring to the damper and
then install them into the front shock
absorber tube.
Install the front shock absorber spring and
tighten the damper mut.
Torque: 1.5～3.0kg-m
Install the front shock absorber spring
with the loosely wound coils facing up
11-15
6mm Socket Spanner
ACTIVE 50
INSTALLATION
Install the front shock absorbers onto the

steering stem.

Tighten the lower mount bolts.
Install the front fender.
Install the front wheel.
STEERING STEM
REMOVAL
Remove the steering handlebar.
Disconnect the speedometer cable and front
brake fluid pipe and remove the front brake
caliper.
Damper Nut