13
. HYDRAULIC BRAKE
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• Drain the brake fluid from the hydraulic brake system before disassembly.
• Do not allow any foreign matters entering the brake reservoir when filling the brake reservoir
with brake fluid.
• Be careful not to splash brake fluid on any coated surfaces and instrument covers to avoid
damage.
• Inspect the brake operation before riding.
• Brake fluid will damage painted, coated surfaces and plastic parts. When working with brake
fluid, use shop towels to cover and protect painted, rubber and plastic parts. Wipe off any splash
of brake fluid with a clean towel. Do not wipe the motorcycle with a towel contaminated by
brake fluid.
• Make sure to use recommended brake fluid. Use of other unspecified brake fluids may cause
brake failure.
SPECIFICATIONS
Brake disk thickness
Brake disk runout
Brake master cylinder I.D.
Brake master cylinder piston O.D.
Brake caliper piston O.D.
Brake caliper cylinder I.D.
TORQUE VALUES
Caliper holder bolt
Pad pin bolt
Brake fluid tube bolt
Caliper bleed valve
Master cylinder holder bolt
SPECIAL TOOL
Snap ring pliers
Item
2.40~3.0kg-m
1.5~2.0kg-m
2.5~3.5kg-m
0.4~0.7kg-m
1.0~1.4kg-m
Standard Limit (mm)
4
0.15
12.7~12.743
12.657~12.684
25.4~25.45
25.335~25.368
ACTIVE
50
Service Limit (mm)
3.0
⎯
12.75
12.64
25.50
25.30
13-2