KYMCO Active 50 Service Manual page 163

14
. FRAME COVER
ACTIVE 50
Screw Screw
REAR FRENDER REMOVAL
Open the seat.
Remove the R/L side cover (page 14-3).
Remove the frame body cover (page 14-4).
Remove the rear light set (page 14-4).
Remove the two screws from right side and left
side of the rear frender.
Remove the rear frender.
The installation sequence is the reverse of
removal.
Rear Cover Screw
HANDLEBAR FRONT/REAR COVER
REMOVAL
Remove the three screws attaching the
handlebar rear cover.
Disconnect the handlebar rear cover.
Front Cover The Headlight And The Signal Wire
Remove the handlebar front cover.
Disconnect the headlight and the signal wire
connector.
The installation sequence is the reverse of
removal.
Screw
14-5