KYMCO Active 50 Service Manual page 162

14
. FRAME COVER
ACTIVE 50
Screws
FRONT COVER REMOVAL
Remove the R/L side cover (page 14-3).
Remove the six screws from right side and
left side of the front cover.
Remove the screw from front side of the
front cover.
Remove the front cover.
The installation sequence is the reverse of
removal.
Screws
Conter covers
CETER COVER REMOVAL
Remove the back cover(page 14-3)
Remove the met-in box(page 14-3).
Remove the center cover.
The installation sequence is the reverse of
removal.
Screw
Wire connector
REAR LIGHT SET REMOVAL
Open the seat.
Remove the R/L side cover (page 14-3).
Remove the rear carrier (page 14-3).
Remove the frame body cover (page 14-4).
Remove the two screws from right side and
left side of the rear light set.
Disconnect the wire connector of rear light
set.
Rear light set
Remove the rear light set.
The installation sequence is the reverse of
removal.
14-4