KYMCO Active 50 Service Manual page 164

14
. FRAME COVER
ACTIVE 50
Horn Wire
Disconnect the instrument light and the horn
wire connector.
Instrument Light Wire
Disconnect the speedometer cable.
Remove the handlebar rear cover.
The installation sequence is the reverse of
removal.
Speedometer Cable
EXHAUST MUFFLER REMOVAL
Remove the two exhaust muffler joint lock
nuts.
Remove the exhaust muffler lock nut.
Remove the exhaust muffler.
INSPECTION
Inspect the exhaust muffler joint and gasket
for damage, deformation or leakage.
Replace if necessary.
I NSTALLATION
Install the exhaust muffler joint and gasket
and then install the exhaust muffler.
First tighten the two exhaust muffler joint
lock nuts and then tighten the exhaust
muffler lock nut.
Torques:
Exhaust muffler joint lock nut: 0.8～1.2kg-m
～
Exhaust muffler hanger lock bolt: 2.4 3.0kg-m
14-6