KYMCO Active 50 Service Manual page 171

15
. IGNITION SYSTEM
EXCITER COIL/PULSER COIL
INSPECTION
This test is performed with the stator
installed in the engine.
Remove the met-im box.
Disconnect the A.C. generator wire
connector.
Measure the pulser coil resistance between
the blue/yellow wire and ground.
Resistance: 80～160Ω
EXCITER COIL INSPECTION
Disconnect the exciter coil wire coupler and
measure the resistance between the black/red
wire terminal and ground.
Resistance: 550～650Ω
ACTIVE 50
Black/Yellow
Black/Red
15-6