KYMCO Active 50 Service Manual page 187

18
. LIGHTS/INSTRUMENTS/SWITCHES/HORN/
FUEL UNIT
HEADLIGHT
REMOVAL
Remove the handlebar front cover (page 14-
5).
Remove the headlight unit and disconnect
the headlight wire coupler.
Remove the headlight bulb and bulb socket.
Check the bulb for damage and replace with
a new one if necessary.
INSTALLATION
Install the headlight in the reverse order of
removal.
After installation, adjust the headlight
beam.
INSTRUMENT
INSTRUMENT BULBS
REPLACEMENT
Remove the handlebar rear cover (page 14-
5).
Remove the bulbs and replace with new
ones.
SPEEDOMETER REMOVAL
Disconnect the speedometer cable.
Disconnect the speedometer wire connector.
Remove the three screws attaching the
speedometer seat.
Remove the speedometer.
INSTALLATION
The installation sequence is the reverse of
removal.
ACTIVE
Turn signal
Bulbs
Nighttime light
Screws
50
18-2