KYMCO Active 50 Service Manual page 113

10
. CRANKCASE/CRANKSHAFT/KICK
ACTIVE 50
STARTER/TRANSMISSION
Dowel Pins
Bolts
Install the right crankcase over the left
crankcase.
Make sure that the gasket stays in place.
Install and tighten the crankcase bolts
securely in a crisscross pattern in 2-3 steps.
Spring
Install the return spring and spring retainer
onto the kick starter spindle.
Install the snap ring.
Refer to the sections on page 10-4 for
installation of the removed parts.
Snap Ring
Retainer
Gasket
10-12