Installing Designer Glass Beads - Montigo H38DF-ST Indoor Installation, Operation & Maintenance Manual

H(L)38DF-ST See-thru indoor Gas Fireplace
Installing the HL38DF-ST Glass
Beads and Optional River Rocks
Beads
The HL38DF-ST fireplace is supplied with Designer Glass beads.
Remove the Door and trim as shown in the previous Instruction.
Follow these instructions to ensure all parts are removed or replaced
as required. Once the Trim and glass doors are removed place the
marbles randomly across the pan and the burners as described in
Figure 38 to 38d.
Note: (N.G.) Natural Gas models, Only cover the Optional
burner covers with one layer of designer beads.
Figure 38. Installation of the Optional burner covers , (end to end;
place evenly).
Figure 38a. Installation of the designer beads. (Ensure one layer of
beads covers the burner and pilot covers.
Figure 38b. Spreading designer beads evenly .
Figure 39c. Completed glass bead installation.
Page 18
Installation
Figure 38d. Operating Natural gas fireplace with one layer of de-
signer glass beads.
Propane
HL38DF-ST fireplace have the option of installing the
optional cultured rocks or designer glass beads. As described below
(Propane gas), the designer beads or cultured rocks cannot cover the
burners. Doing so produces an undesireable / uneven flame pattern,
and eventual sooting.
www.montigo.com
Note: (LP gas) Ensure the optional river rocks or designer
glass beads do not cover the Burners.
Figure 40. Completed glass bead installation. (Note: place glass
beads on top of mesh pilot cover.
Figure 40a. Operating Propane gas fireplace with designer glass
beads surrounding burner tray.
Optional River Rocks
The HL38DF-ST fireplace has the option of installing the cultured
rocks which mimic real stone. These may be spaced at random, or
in a visual pattern of your preference. See the Montigo web site for
photographs and ideas.
www.montigo.com
HL38DF-ST
Part No. XG0207 - 092109