Spare Parts; Gas Control Valve; Pilot Burner Adjustment - Montigo H38DF-ST Indoor Installation, Operation & Maintenance Manual

Gas Control Valve

Pilot Adjustment Screw
Inlet
Pressure Manifold Pressure
Test Connection
Figure 44. Sit Nova 820 gas valve.

Pilot Burner Adjustment

1. Locate Pilot Adjustment Screw. See Figure 44.
2. Adjust pilot key to provide properly sized flame. See Figure 45.
3. After installing or servicing, leak test with a soap solution with
main burner on. Coat pipe and tubing joints, gasket etc. with soap
solution. Bubbles indicate leaks. Tighten any areas where the
bubbles appear until the bubbling stops completely.
Figure 45. Pilot Burner
Part No. XG0207 -092109
Maintenance
Power
Do not attempt to clean glass when hot.
Generator
Do not clean glass with abrasive materials as any glass etching
may cause premature glass failure.
Wall Switch
Do not operate this fireplace without the glass door, or with a
broken glass door.
Fireplace gas control must be in the "OFF" position and pilot

and main burners extinguished when cleaning appliance
with a vacuum.
Doors and logs can get very hot. Handle only when cool.

NG Gas Valve
LP Gas Valve
NG Pilot
LP Pilot
Burner NG
Burner LPG
Door
Log Set
Log Base
H(L)38DF-ST See-thru indoor Gas Fireplace
WARNING!
Cautions:
Spare Parts H38DF-ST
H38DF-ST
RGC1006
RGC1005
RPA020
RPA021
RBH38501
RBH38502
ROR1157
ROR1158
RDTH38
RLGS47
HWIG38ST
HL38DF-ST
RGC1006
RGC1005
RPA020
RPA021
RBH38501
RBH38502
ROR1157
ROR1158
RDTH38
RLGS47
HWIG38ST
Page 23