Wiring - Montigo H38DF-ST Indoor Installation, Operation & Maintenance Manual

Wiring

Gas Control and Pilot Wiring
Honeywell (Q3450)
Pilot Assembly
Gas Control
Connector
Fan Plug
Receptacle
Gnd Screw
Wall Switch
Figure 31. Wiring for the H(L)38DF-ST-I with Honeywell gas control
and pilot.
WARNING!
We recommend careful consideration be given to the effects of
elevated mantel temperatures which may be in excess of product
design, for example: candles, plastic or pictures. This can cause
melting, deformation, discoloration or premature failure of T.V.
and radio components.
Part No. XG0207 -092109
Installation
H(L)38DF-ST-I
Pilot Electrical
Harness Connector
Honeywell Gas
Control (SV9501M)
Junction Box
115VAC
24VAC
40 VA
Transformer
Wiring for the optional Fan Kit
The H(L)38DF-ST fireplace may be equipped with optional fan kits for
circulating heat into the living space.
Installations in Canada which employ the fans must be electrically
grounded in accordance with CSA C22.1 Canadian Electrical Code
Part 1 and/or Local Codes.
Installations in the USA which employ the fans must be grounded in
accordance with local codes or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70-1987.
For more information see the Fan Kit Installation Guide included with
the fan kit.
NOTE: If any of the original wire supplied with the appliance is replaced, it
must be replaced with the same type, or its equivalent.
5/1/60 Supply
G L1 L2
Black
White
Green
Figure 32. Wiring schematic for optional fans.
Do not attempt to clean glass when hot.
Do not clean glass with abrasive materials as any glass etching
may cause premature glass failure.
Do not operate this fireplace without the glass door, or with a
broken glass door.
H(L)38DF-ST See-thru indoor Gas Fireplace
H(L)38DF- ST
L2-WH
G
L1-BLK
Quick Connect
p g lu to motor
WARNING!
L42DF-ST
Page 15