Kodak EasyShare 5500 User Manual page 100

Chapter 7
Print Fax Confirmation Page
Your Kodak EasyShare AiO can print a confirmation that a fax was sent successfully. The default setting is
No.
Press Menu to display the main menu.
1
Press until Fax Settings is displayed.
2
Press OK to display the Adjust Fax Settings menu.
3
Press until Print Fax Confirmation Page is selected.
4
Press or to enable or disable confirmation page printing.
5
Backup Fax Reception
You can set the Kodak EasyShare AiO to store received faxes in memory. This allows you to reprint your
faxes at a later time. For example, if your EasyShare AiO runs out of paper while receiving a fax, the fax is
stored in memory. When you load more paper, the EasyShare AiO prints the fax. By default, Backup Fax
Reception is No.
After the memory becomes full, the EasyShare AiO overwrites the oldest, printed faxes. All un-printed
faxes will remain in memory until they are printed or deleted. When the memory becomes full of un-
printed faxes, the EasyShare AiO will not receive any more fax calls until the un-printed faxes are printed.
Press Menu to display the main menu.
1
Press until Fax Settings is displayed.
2
Press OK to display the Adjust Fax Settings menu.
3
Press until Backup Fax Reception is selected.
4
Press or to enable or disable Backup Fax Reception.
5
Dialing Mode
You can set the dial mode for your Kodak EasyShare All-in-One to either tone dialing or pulse dialing. The
default setting is Tone Dialing. Most telephone systems work with either type of dialing. If your telephone
system does not require pulse dialing, we recommend using tone dialing. If you have a public telephone
system or a Private Branch Exchange (PBX) system, you may need to select Pulse Dialing. Contact your
local telephone company if you are unsure which setting to use.
NOTE: If you select Pulse Dialing, some phone system features might not be available. It can also take
longer to dial a fax or phone number.
Press Menu to display the main menu.
1
Press until Fax Settings is displayed.
2
Press OK to display the Adjust Fax Settings menu.
3
Press until Dialing Mode is selected.
4
Press or to select Tone or Pulse.
5
96 Kodak EasyShare 5500 AiO