Float Level Inspection; Vacuum Chamber Assembly - KYMCO DINK 200 Manual

13
. FUEL SYSTEM/CARBURETOR/FUEL PUMP

FLOAT LEVEL INSPECTION

Measure the float level at the location of the
main jet (just contacting the float valve).
Float Level: 18.5±1.0mm
Replace the float if the level is incorrect.
Check the operation of the float and then
reinstall the float chamber.

VACUUM CHAMBER ASSEMBLY

First install the jet needle and spring into the
vacuum chamber and then install the needle
holder.
Install the vacuum piston into the carburetor
body.
• Align the hole in the diaphragm with
the vacuum passage in the carburetor
body.
Install the spring.
13-15
Float
Vacuum Piston
Jet Needle Spring
Vacuum Piston
DINK 200
Diaphragm
Needle Holder
Spring
Diaphragm